OUR CHEF D’ŒUVRE | The MIGHTY SAT MK3 | RELEASED in PARIS in MAY 2023
NOW IN ITS MK3.3 VERSION WITH IMPROVED CROSSOVER | MELBOURNE OCTOBER 2024
With the obsolescence of our top of the range SAT MK2 due to difficulties sourcing its back driver in small quantities, we are moving up to a slightly bigger cabinet than the SAT MK1 and MK2, giving us the ability to upgrade the midrange to 13cm - instead of 11cm - and use a 17cm at the back with the same look as the front driver, both being made specially for us by renowned French driver manufacturer AUDAX.
The new SAT MK3
SAT MK1 vs SAT MK3
Our first testimonial!
“I recently had the pleasure and privilege of being one of the first to have a demonstration of the SAT MK3 speakers. For something so small it is hard to believe that such a broad and rich sound can be achieved.
Listening to a superb recording of instrumental Jazz the speakers reproduced a rich texture of sounds from a gentle wire brush on cymbals to deep notes on the piano all beautifully balanced. All this without a subwoofer seems almost hard to believe until you experience them for yourself. Just superb!
Ian J.
Listening to a superb recording of instrumental Jazz the speakers reproduced a rich texture of sounds from a gentle wire brush on cymbals to deep notes on the piano all beautifully balanced. All this without a subwoofer seems almost hard to believe until you experience them for yourself. Just superb!
Ian J.
New specifications | SAT MK3.3 | December 2024
3-way miniature monitor, with bi-wiring and time aligned tweeter in a marine grade birch plywood cabinet with a clear polyurethane finish.
The main full range driver - 13cm - has a paper membrane and phase plug specially designed for us by AUDAX in France.
The back driver is a 17cm also from Audax with a paper cone specially assembled for MAD.
The tweeter is from Audax as in the MK1 and with a new 3D printed faceplate designed in house.
No expenses spared in this product with all crossover components from reputable German manufacturer Mundorf, French SCR and USA designed Dayton Audio
Dimensions : 180x250x250mm
Frequency response: 70Hz - 20KHz +/- 6 dB
Efficiency: 90dB/1W/1m
Phase: +/-18 degrees from 20Hz to 20KHz
Impedance: Nominal 4 ohms
Crossover frequencies: 400Hz@12dB/oct | 4KHz@ 12dB/oct, Linkwitz-Riley phase alignment,
Power handling: 100W
Online price: 3700.00USD | 3200.00EUROS | FOB SYDNEY
or 6,270.00AUD - the 🇦🇺🇳🇿 price includes delivery and GST anywhere in Australia or New Zealand.
You can listen to them at the following locations::
🇦🇺 Microphase Audio Design in Sydney
🇦🇺 Groove Audio in Melbourne
🇫🇷 Point Musiques near Beauvais
🇬🇧 Val Hifi in Kent
The main full range driver - 13cm - has a paper membrane and phase plug specially designed for us by AUDAX in France.
The back driver is a 17cm also from Audax with a paper cone specially assembled for MAD.
The tweeter is from Audax as in the MK1 and with a new 3D printed faceplate designed in house.
No expenses spared in this product with all crossover components from reputable German manufacturer Mundorf, French SCR and USA designed Dayton Audio
Dimensions : 180x250x250mm
Frequency response: 70Hz - 20KHz +/- 6 dB
Efficiency: 90dB/1W/1m
Phase: +/-18 degrees from 20Hz to 20KHz
Impedance: Nominal 4 ohms
Crossover frequencies: 400Hz@12dB/oct | 4KHz@ 12dB/oct, Linkwitz-Riley phase alignment,
Power handling: 100W
Online price: 3700.00USD | 3200.00EUROS | FOB SYDNEY
or 6,270.00AUD - the 🇦🇺🇳🇿 price includes delivery and GST anywhere in Australia or New Zealand.
You can listen to them at the following locations::
🇦🇺 Microphase Audio Design in Sydney
🇦🇺 Groove Audio in Melbourne
🇫🇷 Point Musiques near Beauvais
🇬🇧 Val Hifi in Kent
Frequency response of front drivers + Bass driver.
NOTE: Scale is 5dB/division
|
overall frequency and phase response . Note the very linear phase response
|
